How it works
Sharebot 42 can use different size nozzles (the pre-assembled 0.4 one, 0.6 and 0.8) that can be substitude in just few steps.
WARNING: Changing the nozzle you’ll change also the distance between the nozzle itself and the probe. We advice you to increase the probe offset value to avoid any damage and remove the magnetic printing plate.
The operation must be done without the filament inside the extruding block and with printer switched off.
To remove the pre-assembled nozzle, use the key you find inside the given kit, unscrewing it counter clockwise. Use a 17mm key to block the brass heating part (placed above the nozzle) so that it cannot touch the cables.
Now you can assemble the new nozzle, taking care not to touch the cables and not moving the brass part. We advice to use the Sharebot logo as reference point: it must always be placed on the right side.
Before starting a new printing process, we advice to increase the probe offset value of +0.5.