Sharebot Qwarm
Large format filament deposition 3D Printer equipped with a heated chamber , ready for industry to create products and prototypes with high-performance technical materials
Sharebot Qwarm is a professional grade heated chamber large-format filament 3D printer .
Entirely produced in Italy, the printer allows you to print models and prototypes using materials with high technical performance. Equipped with a large print volume of 300 x 420 x 300 mm, it allows to obtain impeccable results in long-lasting and large-sized prints. Thanks to the liquid-cooled tungsten carbide nozzle, it is possible to reach 500 ° C while the printing chamber can maintain a temperature of 80 ° C during the entire manufacturing process. The heated bed in high resistance borosilicate glass guarantees the attachment of the models to the platform and allows to reach and maintain a temperature of 160 ° C.
The main technical characteristics are:
- HEPA Filter
- Retracted brushless stepper motors
- Auto leveling sensor
- Filament presence sensor
- Separate passively conditioned filament compartment
- Internal monitoring camera
- Sharebox remote control system
- Heated printing chamber up to 80 ° C
- Tungsten carbide nozzle up to 500 ° C
- Extruder Liquid Cooling System
- Heated print bed up to 160 ° C
- High precision linear guides
New high-tech filaments for special applications
The set of technical characteristics indicated above allows the use of dedicated Sharebot high performance technical materials such as PET-HTC, PPS F1-RaceGrade and PEEK-HTC.
PET-HTC (High Tecnology Carbon 10%)
Polyethylene terephthalate is a thermoplastic suitable for food contact, belonging to the family of polyesters. It is also used for its electrical properties, chemical resistance, high temperature performance, self-extinguishing, ease of use. The good mechanical performances are improved by the addition of carbon while keeping the cost low so as to make it widely usable.
F1-Race (PPS Carbon RaceGrade 10%)
A filament with exceptional technical performance suitable for the most advanced applications such as racing and aerospace. It is normally used for components of the automotive industry, components of household appliances, bodies and impellers of pumps, valves and solenoid valves especially when resistance to chemical agents, steam or high temperatures is required, as well as corrosive flows both liquid and gaseous. The ideal solution for the industry that requires applications in extreme environments or with extreme performance.
PEEK-HTC (PEEK Carbon 8%)
The main characteristics of PEEK are mechanical strength, chemical corrosion and high temperatures resistance. For this reason it is used both for the construction of parts of pistons, valves and compression plates and in the aerospace, automotive and chemical process sectors. Given its resistance to high temperatures, it is used as a thermal insulator in some types of extruder.
** High performance technical material that requires special precautions for its use.
| Dimensions | 1040 X 1720 X 756 mm |
|---|---|
| Weight | ca. 250 Kg |
| Print Volume | 300 X 420 X 300 mm |
| XY Resolution | ± 0,2 mm |
| Z Resolution | > 0,2 mm |
| Tungsten Carbide Extruder | 0,4 mm | fino a 500°C |
| Heated Print Bed / Max T° | Integrato / fino a 160°C |
| Heated Build Chamber/ Max T° | Integrata / fino a 80°C |
| Slicer | Simplify3D Continuum |
| Connectivity | Wifi – Ethernet- Sharebox |
ABSOLUTE
PET
TPU-RE 98A
NY-GLASS
NY-CARBON
PET-HTC
F1-RACE
PEEK-HTC
| ABSOLUTE | PET | TPU-RE 98A | NY-GLASS | NY-CARBON | PET-HTC | F1-RACE | PEEK-HTC | |
|---|---|---|---|---|---|---|---|---|
| Chemical Comp. | Acrylonitrile-butadiene-styrene | Polyethylene terephthalate | Polyurethane | Nylon Fiberglass Infused | Nylon Carbon Infused | Polyethylene terephthalate + 10% carbon | Poliparafenilen sulfide + 10% carbon | polyether ether ketone + 8% carbon |
| Quantity | 700gr | 750gr | 500gr | 500gr | 500gr | 500gr | 500gr | 250gr |
| Density | 1.1 g/cm3 | 1.28 g/cm3 | 1.16 g/cm3 | 1.07 g/cm3 | 1.00 g/cm3 | 1.20 g/cm3 | 1,33 g/cm3 | 1,32 g/cm3 |
| Tensile module | 2.030 Mpa | 3200 Mpa | 150 Mpa | 4.000 Mpa | 6.000 Mpa | 7.800 Mpa | 10.900 Mpa | 13.000 Mpa |
| Tensile strength at break | 43 Mpa | 79 Mpa | 50Mpa | 95 Mpa | 100 Mpa | 110 Mpa | 130 Mpa | 180 Mpa |
| Tensile Elongation | 3,40% | 5,00% | — | 8,60% | 6,20% | 3,30% | 4,00% | 2,30% |
| CHARPY Impact strength | 58 kJ/m2 | 81 kJ/m2 | — | 80 kJ/m2 | 60 kJ/m2 | 13 kJ/m2 | 20 kJ/m2 | 50 kJ/m2 |
| Heat Deflection Temperature | 97°C | 72°C | — | 160°C | 155°C | 110°C | 270°C | 335°C |
| Extruder Temperature °C | 245-255 | 230-240 | 235-245 | 250-265 | 250-265 | 250-265 | 300-310 | 420-450 |
| Print Speed mm/s | 60-70 | 60-70 | 30-40 | 40 | 40 | 45-65 | 30-50 | 10-40 |
| Bed Temperature °C | 80-90 | 70-80 | 40-60 | 60-70 | 60-70 | 0-70 | 0-70 | 120-150 |
| Nozzle Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel/Tungsten |
| Bed adhesive/Glue | Magigoo Standard | Magigoo Standard | — | Magigoo PA | Magigoo PA | Magigoo HT | Magigoo Standard | Magigoo HT |
Request a quote for 3D Printed sample, send your file, choose the material and receive the quotation. We will take care of printing and shipping, in case of purchase of the Qwarm printer the cost of the sample will be discounted from the final price of the machine.
Make sure that the file does not exceed 50 MB and that it is in the STL or OBJ format.
If you have problems uploading the file, please contact us directly at info@sharebot.it
